Table of Contents
Operation and Menus
For most camera manufacturers, the small and/or low-end cameras in the lineup generally tradeoff some physical control in exchange for the size. Luckily, Fuji seems to buck this trend, and they still provide the majority of the physical controls the larger X cameras have. The Fujifilm X-M1 has the major control functions largely laid out in the same manner on previous X-Series cameras with one big change:
One of the more controversial aspects of the Fujifilm X-M1 is the change from the tried and true control scheme of using an aperture ring and shutter speed dial to select between Program, Aperture Priority, Shutter Priority and Manual modes. Instead, the X-M1 changes just one thing, which moves it in line with most modern cameras as far as typical interface goes: The shutter speed dial has been replaced with a standard Mode dial.
As a result of this change, what has been the dedicated Exposure Compensation dial on previous X-Series cameras becomes simply the top command dial, and sits on the back right edge of the top of the camera. While this change was widely criticized by many when the camera was announced, in reality, it’s not a big change at all. In fact, if you shoot mostly Aperture priority mode with the Fuji R lenses (with an aperture ring), the operation is essentially identical to that of the X-Pro 1 and the X-E1. The aperture ring on the lens will still control aperture, and the top right dial still controls exposure compensation. When using the XC 16-50mm kit lens or the new 27mm pancake, neither of which feature an aperture ring, aperture control moves to the rear command dial.
The Manual and Program modes operate, in my opinion, better on the X-M1 than on the earlier cameras. In Manual mode, the shutter speed operation moves to the top command dial, which is both easier to access than the shutter speed dials on other X cameras, and more functional, as the top command dial just increases shutter speeds in 1/3 stops instead of the full stop increments of the previous X-series cameras. While those other cameras could access the 1/3 stop increments by using the 4-way buttons, the simpler implementation on the X-M1 is far less fiddly than messing around with two separate controls. In Program mode, the program shift function has now been added to the rear command dial, making it easier to do program shift than using the arrow keys on the previous X-Series cameras.
Only in Shutter Priority mode is there a slightly reduced feel to operation, as the shutter speed control moves to the rear command dial. This is easy to operate, but gives you a little less of that ‘old camera’ feel. The big negative consequence to replacing the shutter speed dial with a mode dial is that now you do lose the ability to see your settings at a glance with the camera off. This is a really nice feature on the X-Pro 1 and X-E1, and I missed it sometimes with the X-M1, but overall, this change wasn’t as big a deal to me as I thought it would be when the camera was first announced.
In fact, most of the control changes for the X-M1 are slightly superior to the cameras that came before it. It is much easier to access all the settings quickly on the X-M1, as they have been laid out for one-handed operation. Only in two instances do I feel that the controls have taken a step back. First, the elimination of the dedicated focus control switch, that sits on the front of the X-E1 and X-Pro 1. Now, switching between focus modes must be done through the Q menu or the main menu system. Second, since the autofocus point selection and size button has been moved to the top of the arrow buttons, you can no longer press ‘OK’ to immediately go to the center autofocus point, as OK now confirms the point position. Instead, using the Disp/Back button while moving points will recenter the AF point. This can lead to a little confusion when switching between cameras, as the OK button does different things between the X-M1 and the other X bodies when pressing OK.
The menu system is very similar to its X brothers, and is laid out very logically. A few things that used to be in menus (such as multiple exposure) are now moved to a different mode on the mode dial, but all in all, if you are familiar with the X-E1 or X-Pro 1, you’ll fit right in here.
The X-M1’s Q menu, accessible from a single button push, gives you quick access to JPEG parameters as well as many functions that are somewhat regularly changed. ISO, Focus Mode, Self Timer, File Mode, Film Simulation as well as IS mode (especially needed for the 16-50mm lens, which does not have a physical IS switch).
Overall, I have found the X-M1 to be a quick and easy camera to use. Having two command dials on a camera this small is a relative rarity, especially in this price range, and it makes the X-M1 operate in a decidedly photographer friendly manner, rather than feeling like a dumbed down interface for the casual snapper.
Focus Peaking
The X-M1 is the first Fujifilm interchangeable lens camera to feature focus peaking out of the box. The feature was added via firmware update to the X-Pro 1 and X-E1 in July, and that carries over to the X-M1 here. With focus peaking enabled, a high contrast white outline surrounds areas of the image that are in focus, thus allow for much faster and accurate manual focus. This is particularly useful when adapting manual focus lenses to the camera. Interestingly enough, while the peaking certainly helps the X-E1 and X-Pro 1, the implementation Fuji has chosen works extremely well on the X-M1. The high-resolution rear screen is perfect for this implementation, and I actually found focusing lenses on the X-M1 easier than manually focusing on the X-E1, even when using the EVF. Fuji has stated they will be adding more colors than white in a future firmware update, which may help the peaking stand out a bit more.
Peaking can be turned on and off very quickly by pressing and holding down the rear command dial, a very nice usability touch. The only down side is that peaking only works when the camera is set to manual focus mode, so that change must be made in the Q menu prior to using the feature.
Autofocus and Performance
The Achilles Heel of the Fujifilm X-Series cameras has historically been its autofocus performance. The original X-Pro 1 had absolutely abysmal autofocus at launch, that was progressively improved over the past two years. The X-E1 started with fair to poor autofocus, with both cameras getting a rather drastic improvement with the release of the latest firmware a few weeks ago.
As you might expect, the X-M1 benefits from these advancements, and the autofocus performance is essentially identical to the X-E1 on firmware version 2.0. That is, it’s acceptable in speed, accurate, and has no real problems locking on in most any lighting situation. It still lags the competition by a noticeable amount in pure speed, being outclassed by the NEX and especially Micro 4/3 in that regard, but the X-M1 is able to find focus quickly enough to be usable for most photographic situations. Of course some of this is lens dependent, with the 60mm f/2.4 being relatively slow, and the 16-50mm kit lens and 14mm f/2.8 being relatively quick. You’re not going to shoot a lot of action with the X-M1, but it is a competent camera with regards to its AF performance.
In general responsiveness, however, the X-M1 improves rather noticeably on the other two X-Series cameras. The X-M1 features the new EXR Processor II, which first debuted in the X100s. This image processor speeds up write times to the card, general image processing tasks such as in-camera RAW conversion and other general tasks. The camera has reduced shutter lag compared to the X-E1, with essentially no delay between pressing the shutter and image capture.
The biggest improvement for my shooting with this faster image processor is that finally, you can magnify the live view while the camera is writing an image to the card. When I use adapted manual focus lenses on my X-E1, I have missed several shots due to the inability to zoom in to get critical focus while the camera is still writing to the card. If you’ve just fired off 3-4 frames, this can be a lengthy delay. With the X-M1, you can magnify at will, without regard to the image buffer. Since the camera writes faster, the buffer also clears much faster.
All of these things combine to make the X-M1 the most responsive X-Series interchangeable lens camera yet.
Flash
The X-M1 features a pop-up flash that is accessed by simply pressing the button on the rear of the camera. The flash extends up and forward. Like the X-E1, the X-M1’s pop up flash can be tilted back to provide bounce flash, though the limited power means this is only really useful for fast lenses or higher ISOs. Flash exposure is quite accurate. While a pop-up flash is generally not the best for great lighting, it certainly comes in useful in certain situations, so it’s a very nice thing to have.
Leave a Reply